Products
Electrochemical Devices (ECD)
The liquid analytical instrument experts.
Electro-Chemical Devices, Inc. (ECD) is a recognized leader in industrial process instrumentation: Transmitters, Controllers, Analyzers, Sensors, Electrodes
ECD's products measure:
pH, Conductivity, Resistivity, Oxidation Reduction Potential (ORP, REDOX), Dissolved Oxygen (DO) optical & amperometric, Turbidity, Free Residual Chlorine, Total Chlorine, Salinity, Ion Selective Electrodes (pION) for Ammonium, BROMIDE, Cadmium, Calcium, Chloride, Chlorine Dioxide, Copper, Cyanide, FLUORIDE, Nitrate, Potassium, Sodium and Sulfide. Colorimetric Analyzers for Aluminum, Ammonia, CALCIUM HARDNESS, Chlorine, Chloride, Chromium VI, Copper, Cyanide, Iron, Manganese, Nickel, Nitrate, Nitrite, Total Nitrogen, Phosphate, Total Phosphate, Silica, Sulfate, Sulfide, Zinc. Control systems for boiler blow down & cooling towers.
Panner Sales is pleased to represent ECD. Panner can supply application assistance and pricing for your instrumentation and process control needs. Datasheets for several ECD instruments are shown below or you may click on the links shown above.
The HYDRA ammonium analyzer from Electro-Chemical Devices uses ion specific electrodes to measure the concentration of dissolved ammonium in water. The HYDRA features an integrated, submersible sensor with a built-in spray cleaner to reduce maintenance. Measurement electrodes are easily replaced and the analyzer performs corrections for interfering ions and pH compensation. These features provide for the lowest total cost of ownership. Panner Sales offers a free 30 day trial on this unit for you to see for yourself.
T28 Transmitter Suitable For Hazardous Environments
The highly intelligent Model T28 Transmitter designed for ECD's innovative analytical instrumentation product line has received FM and CSA approvals. These approvals allow the Model T28 to be used in hazardous locations where combustible gases and vapors are potentially present and represent a safety hazard to people, equipment and facilities.
The 24 VDC loop powered Model T28 transmitter sends an isolated 4-20 mA current signal to a DCS, PLC, controller or recorder. The transmitter can be located up to 3 miles from the power source.
Dissolved Oxygen
The Triton DO8 from Electrochemical Devices is an optical DO sensor using a fluorescence quenching method to determine the oxygen concentration in water. No sample preconditioning is required and the sensor may be used in submersible or inline applications. It has a range of 0-20 ppm. This unit provides the best solution for aeration basins, aquaculture and all types of environmental water. The Triton D09 model from ECD is capable of measuring TRACE amounts of dissolved oxygen with a range of 0.001 to 20 ppm. It uses a 3 electrode potentiostatic measurment system and is most commonly applied in the monitoring of bolier feedwater.
Chlorine Dioxide Analyzer
The Model CDA-22 is a panel mounted, ready to use chlorine dioxide analyzer. It is designed to monitor chlorine dioxide in drinking water, rinse water, cooling water or other fresh water samples from 0.05 - 20 ppm ClO2. The CDA-22 features a plug and play design that incorporates a flow control device, a chlorine dioxide sensor and the C22 analyzer/controller conveniently mounted on a PVC panel. Connect the sample and drain lines, connect the power and outputs and it is ready to use. Calibration is accomplished by DPD comparison.
